Contact Us

T: +27 (0)12 751 0630
E: esales@hyperdyno.com

     admin@hyperdyno.com

Welcome to Hyper Power International!

Quad / Kart Dynamometer

Be the first to review this product

Availability: In stock

Quick Overview

 


This dynamometer is one of the most versatile dynamometers supplied by Hyper Power, since it can test Quads, Karts and Motorcycles.


 

This product has custom options.

More Views

  • Quad / Kart Dynamometer

Details

This is the ultimate dynamometer if you want to test one, any or all of either Quads, Karts or Bikes.  True to Hyper Power's reputation, this dyno can measure from as little as 1HP to excess of 400HP, limited by wheel spin.

Similar to all other rolling (chassis) dynamometers, you have the option to upgrade the inertia to have a loading facility. 

A very sensible option on this dyno is “Upgrade to Mobile” facility.  Once again you have the option to upgrade after you bought the dyno.  It is essentially a separate custom trailer that can also double as a Quad/Kart or even bike trailer. Unfortunately this upgrade is not available if you have the Loading facility, since it will be physically too big to tow it on the road.

More information is available in the INFORMATION – WELCOME TO HYPER POWER section regarding the:

-       The integrated Air/fuel ratio meter

-       The loading facility

-       Comprehensive Hyperwin Software

-       Integrated sensors

-       And other VERY interesting stuff

 

Specifications:

Single Roller

  • Roller diameter : 325 mm
  • Roller weight : ±290 kg
  • Roller inertia : 6.5 kg m^2
  • Roller linear mass simulation : 245 kg
  • Maximum wheel track : 1400mm
  • Maximum allowable speed : 400 km/h
  • Maximum power absorption : 370 kW (500Hp) depending on wheel spin
  • Maximum tractive effort : 4000 N depending on wheel spin
  • Roller knurled

 

Frame

  • Height : 350 mm
  • Width : 1600 mm
  • Length : 2200 mm
  • Ramp length : 2000 mm
  • Total weight : ±390 kg
  • Maximum wheel base : 1700 mm (wheel centres)

 

Upgrade to loading - Retarder Unit (upgrade)

  • Minimum crating dimensions : 600 mm (W) x 500 mm (D) x 600 (L)
  • Weight : ±200 kg without cooling fan
  • Maximum allowable speed : 330 km/h
  • Maximum power absorption : 400 kW
  • Maximum torque : 1000 Nm
  • Maximum tractive effort : ±6000 N
  • Continuous absorption with cooling fan on retarder : ±30 % of maximum ratings

 

Dynamometer Control Unit - Retarder Unit

  • Power requirement : 220 V 25A
  • Speed stability : ±1 km/h
  • Load stability : ±0,1 kW
  • Temperature sensor accuracy : 0,5 %
  • Pressure sensor accuracy : 0,5 %

 

Ratchet Tie Downs :

  • 4 x 1,000 kg capacity tie downs ensure safe dyno testing at high speeds.

Cooling fan for motorcycle :

  • Option 1 :        1.1 kW Ø400mm axial fan for Inertia dyno testing only.
  • Option 2:         2.2kW Ø400mm axial fan for Loading and Inertia testing

Cooling fan for retarder :

  • 220V 0,18kW Ø315mm fan. Ensures prolonged testing at constant speeds.

RPM Pick-up :

  • Clips onto negative of coil, injector or inductive HT Lead

Lambda Sensor :

  • Wide range oxygen sensor integrated with computer to display Air/Fuel readings on the graphs.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.